Description
The Sirui P-325FS Carbon Fibre Photo/Video Monopod is a 5-section carbon fibre monopod with three fold-down support feet for additional stability. In addition, an adjustable friction control ball head mechanism in the base of the monopod and a panning handgrip enables smooth 360° pan and 36° tilt movements. The three support feet fold up and lock into position against the monopod and can even be removed entirely and used as a table-top tripod. A large rubber base foot is available for conventional use and it can be removed and replaced with the included spike foot for use on soft or slippery ground. It weighs just 1.2kg but can support a load up to 10kg.
The mounting plate on the P-325S comes with a reversible screw that accommodates 1/4″-20 and 3/8″-16 tripod sockets or compatible heads. The platform is also a quick-release design allowing for quick mounting of the camera. The maximum height reaches 140cm and it can fold down to 45.5cm, four flip locks provide quick and stable adjustment. With adjustable tension control, the base locking collar enables the monopod to stand upright on its own.
SIRUI P-325FS and P-325 FL are advanced photo/video monopods that combine functions of monopods, extension rods, and tabletop tripods as a whole. The innovative modular design and flip-lock mechanism are going to provide you with more convenience and creative opportunities.
Another Portable Option
The carbon-fibre structure gives the P-325FS monopod a weight of only 1.17kg/2.58lbs, which is 21% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots.
Modular Design
The monopod features a unique modular design. Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod.
Monopod: Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option.
Extension Rod: highly mobile situations, the weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras.
Table Tripod:low-angle shooting, desktop recording, close-up shots, vlog shooting.
Quick Release System
The quick-release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way.
Quick-release mounting screw: Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4″ and 3/8″ thread.
Quick-release tripod base: Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod.
Quick-release mounting plate
Flip Lock Mechanism
The monopod is divided into 5 sections via 4 flip locks. Boasting a user-friendly design, shooters should feel fairly comfortable and easy using flip locks. Open all flip locks with just a single hand to adjust the monopod from the minimum height to the maximum height.
360° Panning
The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360° panning ability.
Quick Leveling
Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots.
Rotatable Ring
The ring is 360″ rotatable with built-in damping, so it can be rotated to the desired position and won’t turn around easily. Unlike other rings, this ring comes with an opening that allows the strap to be removed easily.
36 Tilting
Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36 in any direction to get a lot of movements.
Features:
Tripod legs are covered with rubber pads to ensure a good grip.
Pull out the knob to change its position.
Full-Featured Tripod Foot
The tripod foot is well built with solid aluminium, offering two positions of your choice. Legs can be folded up reversely to fit into your rucksack.
Fold down and hold the tripod legs as an extension grip to shoot a vlog or to do the high-angle shooting.
In addition to reducing the weight of the tripod foot itself, holes in the legs help to bind the monopod to places where it cannot stand firmly.
The monopod comes with a rubber foot that can be retracted to reveal a spike.
The vertical notch allows you to shoot in portrait mode. (only suggest to use in table tripod mode)
Great Performance in Extreme Weather
The monopod will never let you down whether in bitter cold or scorching heat (-40°C-100°c).
Reviews
There are no reviews yet.